2009 BMW 335i Coupe Specifications
| GENERAL |
|
| Year |
2009 |
| Make |
BMW |
| Model |
335i |
| Body Style |
Coupe |
| Engine |
3.0L six-cylinder twin-turbo |
| Transmission |
6-speed automatic |
| Option Package |
Sport Package |
|
|
| ENGINE |
|
| Engine code |
N54B30 |
| Engine type |
Water-cooled, twin-turbocharged inline 6-cylinder |
| Location in vehicle |
Front, longitudinally mounted |
| Bore |
84.0 mm (3.31 in.) |
| Stroke |
89.6 mm (3.53 in.) |
| Displacement |
2,979 cc (182 c.i.) |
| Compression ratio |
10.2 to 1 |
| Maximum horsepower |
300 bhp @ 5,800 rpm |
| Maximum Torque |
300 lb-ft. @ 1,300 - 5,000 rpm |
| Maximum engine RPM |
7,000 rpm |
| Engine block |
Cast aluminum (AL 226) open-deck with cast-in iron cylinder liners |
| Deck height |
n/a |
| Bore spacing |
91 mm (3.58 in.) |
| Crankshaft |
Forged steel |
| Connecting rods |
Forged steel, cracked cap |
| Pistons |
Forged aluminum |
| Balance shafts |
n/a |
| Cylinder head |
Single piece cast aluminum |
| Intake valves |
31.4 mm x 2 stainless steel |
| Exhaust valves |
28.0 mm x 2 stainless steel |
| Valvetrain type and actuation |
DOHC 4-valves per cylinder with BMW Bi-Vanos infinitely variable intake and exhaust valve timing |
| Variable valve timing change over point |
Variable |
| Camshaft type and material |
Cast steel |
| Camshaft drive |
Single chain with automatic tensioner |
| Intake manifold |
Single stage plastic |
| Throttle body diameter |
n/a |
| MAF meter type and diameter |
Hot film |
| Throttle type |
Electronic drive-by-wire |
| Fuel injection ECU type |
Siemens HPI direct fuel injection |
| Fuel injection manufacturer code |
Siemens MSD 81 |
| Fuel injector type |
High-pressure piezo electric direct |
| Fuel injector maximum flow rate |
n/a |
| Fuel tank capacity |
16.1 US gallons |
| Octane requirement |
91 Octane pump gas |
| Ignition |
Bosch direct electronic ignition |
| Ignition coil |
Coil on plug, one per cylinder |
| Distributor |
n/a |
| Number of sparkplugs per cylinder |
1 |
| Sparkplug type and mfg |
Bosch: ZGR6STE2 |
| Firing order |
1-5-3-6-2-4 |
| Exhaust manifold |
Dual 3 into 1 cast-iron manifolds with integrated turbocharger housings |
| Exhaust type and diameter |
Stainless steel dual exhaust with X-pipe and one final muffler per side |
| Primary catalytic converter |
Two, mounted to turbocharger housings |
| Secondary catalytic converter |
Two, mounted under floor, one per side |
| Turbocharger manufacturer and model |
Twin Mitsubishi TD03-10TK3 |
| Turbocharger type |
Single scroll with integrated exhaust manifolds |
| Maximum boost |
8 psi |
| Intercooler type |
Air to air |
| Intercooler location |
Mounted in front bumper |
| Lubrication system |
Pressurized |
| Oil required |
BMW long life rating (LL-01) synthetic oil, see owner's manual for manufacturers and viscosities |
| Oil capacity with filter change |
6.9 US Quart |
| Oil cooler |
Air to oil, mounted in right-front fender |
| Cooling system |
Pressurized, liquid cooled |
| Radiator type and location |
Single row aluminum cross-flow, mounted behind front bumper |
| Coolant |
BMW brand coolant |
| |
|
| TRANSMISSION |
|
| Automatic transmission manufacturer |
ZF |
| Automatic transmission part code |
GA6HP19Z |
| Automatic transmission type |
6-speed automatic |
| Automatic transmission case construction |
Cast aluminum |
| Automatic transmission location |
Front, longitudinally mounted |
| Automatic transmission drive wheels |
Rear |
| 1st Gear ratio |
4.17 |
| 2nd Gear ratio |
2.34 |
| 3rd Gear ratio |
1.52 |
| 4th Gear ratio |
1.14 |
| 5th Gear ratio |
0.87 |
| 6th Gear ratio |
0.69 |
| 7th Gear ratio |
|
| 8th Gear ratio |
|
| Final drive axle ratio |
3.46 |
| Reverse gear ratio |
3.40 |
| Transmission fluid |
Shell M-1375.4 |
| Transmission cooler type and location |
Air to liquid, mounted behind radiator |
| Shifter type |
Cable linkage console mounted, with optional steering wheel mounted Steptronic shifter paddles (Sport Package) |
| Torque converter stall speed in D |
TBD |
| Rear differential type |
Open |
| Optional rear differential type |
n/a |
| Traction and stability system |
DSC (Dynamic Stability Control) |
| |
|
| CHASSIS |
|
| Chassis code |
E92 |
| Body style |
2-door, 4-passenger coupe |
| Chassis material and construction |
Unit body steel |
| Overall length |
181.1 in. |
| Width |
70.2 in. |
| Height |
54.9 in. |
| Wheelbase |
108.7 in. |
| Front track |
59.1 in. |
| Rear track |
60.2 in. |
| Base curb weight, manual transmission |
|
| Base curb weight, automatic transmission |
3,582 lbs. |
| Weight distribution, manual transmission |
|
| Weight distribution, automatic transmission |
51.4 / 48.6 |
| Front headroom |
38.4 in. |
| Front leg room |
41.8 in. |
| Front hiproom |
n/a |
| Front shoulder room |
55.3 in. |
| Rear headroom |
36.8 in. |
| Rear leg room |
33.7 in. |
| Rear hiproom |
n/a |
| Rear shoulder room |
51.9 in. |
| Cargo volume, rear seat up |
11.1 cu-ft. |
| |
|
| SUSPENSION AND BRAKES |
|
| Front suspension |
Independent, double-pivot spring strut axle with MacPherson struts, coil springs, and anti-roll bar |
| Rear suspension |
Independent, 5-link with coil springs and anti-roll bar |
| Front spring rate |
145 lb/in. |
| Rear spring rate |
460 lb/in. |
| Front shock type |
Pressurized gas strut |
| Rear shock type |
Pressurized gas shock |
| Front sway bar diameter MT/AT |
26.5 mm hollow |
| Rear sway bar diameter MT/AT |
13.0 mm solid |
| Front sway bar wall thickness |
4.3 mm |
| Rear sway bar wall thickness |
n/a |
| Steering type |
Rack and pinion with power assist |
| Steering ratio |
16.0 to 1 |
| Steering wheel turns lock to lock |
2.9 |
| Turning circle |
36.1 ft. |
| Steering wheel diameter |
370 mm (14.6 in.) |
| Power steering assist type |
Speed-sensitive, variable assist hydraulic |
| Power steering fluid type |
ATF Dextron III or Pentosin CHF 11S |
| Braking system |
4-wheel disc with power assist |
| Front brake rotor type and material |
Cast iron ventilated disc |
| Rear brake rotor type and material |
Cast iron ventilated disc |
| Front brake rotor size |
348 x 30 mm (13.7 x 1.18 in.) |
| Rear brake rotor size |
336 x 26 mm (13.2 x 1.02 in.) |
| Rear brake drum size |
n/a |
| Front caliper type |
Single piston steel sliding calipers |
| Rear caliper type |
Single piston steel sliding calipers |
| Anti-Lock braking system type |
ABS |
| Brake fluid type |
Low viscosity DOT 4 brake fluid |
| |
|
| WHEELS AND TIRES |
|
| Wheel manufacturer code |
Style 189 |
| Wheel finish and material |
Painted cast aluminum |
| Front wheel size |
18 x 8.0 in. |
| Rear wheel size |
18 x 8.5 in. |
| Bolt pattern |
5 x 120 |
| Front wheel weight |
24.8 lbs. |
| Rear wheel weight |
26.3 lbs. |
| Front wheel offset |
34 mm positive |
| Rear wheel offset |
37 mm positive |
| Front wheel centerbore |
72.5 mm |
| Rear wheel centerbore |
72.5 mm |
| Lug thread pitch |
12 x 1.5 |
| Wheel lug tightening torque |
89 lb-ft. |
| OEM tire model and manufacturer |
Bridgestone Potenza RE050A (Run Flat) |
| Front tire size |
225/40R18 88W |
| Rear tire size |
255/35R18 90W |
| Spare tire size |
n/a |
| |
|
| OPTIONAL EQUIPMENT |
|
| Optional wheel manufacturer code |
Style 230 |
| Optional wheel finish and material |
Painted cast aluminum |
| Optional front wheel size |
19 x 8.0 in. |
| Optional rear wheel size |
19 x 9.0 in. |
| Optional front wheel weight |
27.8 lbs. |
| Optional rear wheel weight |
29.2 lbs. |
| Optional front wheel offset |
37 mm positive |
| Optional rear wheel offset |
39 mm positive |
| Optional Wheel lug tightening torque |
89 lb-ft. |
| Optional OEM Tire model and manufacturer |
Bridgestone Potenza RE050A (Run Flat) |
| Optional front tire size |
225/35R19 88Y |
| Optional rear tire size |
255/30R19 91Y |
| Optional spare tire size |
n/a |
